
Bruno Independent Living Aids, Inc., 1780 Executive Drive, P.O. Box 84, Oconomowoc, WI 53066
Phone (800) 882-8183 Fax (262) 953-5501
Any reproduction or other use of these materials without written permission of Bruno Independent Living Aids, Inc. is expressly prohibited.
Bruno Independent Living Aids, Inc. reserves the right to modify or make changes to these specifications at any time without notice.
SRE-2010 Electra-Ride
™
Elite Stairway Elevator
Technical Specifications
rev: 07-01-2011
ILS-00826
MODEL NUMBER: SRE-2010 and SRE-2010C
U.S. F.D.A. CLASSIFICATION: Class II
CLASSIFICATION NUMBER: 890.5150
PRODUCT CODE: ILK
CSA C-US Listed: File Number 208135
PERFORMANCE STANDARDS:
ANSI/ASME: A18.1-1999 (Sec. 4 or 7) Safety Standards for Platform Lifts and Stairway Chairlifts
ANSI/ASME: A18.1-2003 (Sec. 4 or 7) Safety Standards for Platform Lifts and Stairway Chairlifts
ANSI/ASME: A18.1-2005 (Sec. 4 or 7) Safety Standards for Platform Lifts and Stairway Chairlifts
ANSI/ASME: A18.1-2008 (Sec. 4 or 7) Safety Standards for Platform Lifts and Stairway Chairlifts
CSA B613 Private Residence Lifts for Persons with Physical Disabilities
ANSI/ASME: CSA B44.1/ASME-A17.5 Elevator and Escalator Electrical Equipment
RATED LOAD: 400 lb (181 kg) maximum
NUMBER OF PASSENGERS: 1
POWER SOURCE: 24VDC comprised of 2 each 7AH 12 volt sealed maintenance-free lead acid batteries;
On/Off power switch to prevent battery drain over lengthy storage periods
CHARGER: 120VAC/1.5 A, 24VDC/2 A continuous monitoring, full primary cut off
DRIVE: 24VDC direct drive gear-motor, 2 pole rated .68 hp, 58:1 right angle self-locking worm gear
box, 41.5 RPM on the output shaft of the gear box
FINAL DRIVE: integrated 8dp gear rack on rail with a spur gear on the gearbox output shaft
MOTOR CONTROLLER: custom 24VDC PWM controller with acceleration ramping
BRAKING: dynamic motor braking through the motor controller, self-locking worm gear box, and
electro-mechanical motor brake
CALL/SEND CONTROL: infra-red wireless control; momentary switching requiring a user to
continuously hold button to control unit
ARMREST CONTROL: 3-position, momentary rocker switch requiring user to continuously hold rocker
switch to control unit; switch mounted under armrest
SUPPORTS: clamps anchored to stair tread; normal rail position is 2” (50.8 mm) above step nose;
number of clamps dependent on the length of rail; optional height-adjustable clamps
available
ANGLE: (residential) adjustable from 0 to 45 degrees standard; custom to 50 degrees
(commercial) adjustable from 30 to 45 degrees standard; custom to 50 degrees;
contact Bruno Technical Service for low-angle applications.
Comments to this Manuals