Bruno SRE-2700 Installation Manual download pdf (Page 41)

SRE-2000C 11-14-2007

The speed adjustment potentiometer is

on the carriage (see left).

To adjust:

1. Loosen the collet nut on the speed

control potentiometer approximately

one-half turn.

2. Adjust the speed by turning the slotted

shaft on the potentiometer.

clockwise=faster,

counterclockwise =slower

3. With the customer on the unit make

several test runs to arrive at the most

to appropriate speed setting.

4. When the speed has been properly

set, retighten the collet nut.

5. Recheck the speed.

ADJUSTMENTS

counterclockwise

slower

clockwise

faster

Seat height adjustment

1. Remove all (4) M10 x 20mm bolts.

2. Slide the seat up or down.

3. Line up the holes on the seat

post with the holes on the foot-

rest mounting plate at the desired

height.

4. Reinsert the M10 x 20 mm bolts

and corresponding washers.

5. Tighten.

Speed control adjustment

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 55 56

No comments

Bruno SRE-2700 Installation Manual Page 41