Bruno SRE-2700 Installation Manual download pdf (Page 46)

SRE-2000C 11-14-2007

UNIT OPERATES

ERRATICALLY OR

INTERMITTENTLY

WITH REMOTE

CALL/SEND

• Check fuse, replace if necessary.

• Check circuit breaker, reset if necessary.

• Check battery connections.

• Check footrest safety switches to see if one of these

limit switches is depressed. Sliding safety tray below

footrest should slide freely and not stick in a position

which would depress one of the safety switches.

• Check for discharged batteries. Battery voltage should

be in a range of 16-28 VDC.

• Check for discharged batteries.

• Check setting of speed control POTENTIOMETER.

• Check for loose connections.

• Check to make sure charger is plugged in and working.

Unit is not set up for correct stair side operation. Make

correct connections according to instructions in the

installation manual

• Check all safety mechanisms, including swivel seat

safety switch.

• Change the delay setting on the receiver board to

900 msec.

• Reorient the transmitter (to point directly at the

carriage).

• Consult your dealer, an experienced technician or call

the Bruno Technical Service Department.

• Check swivel seat safety switch.

• Check to see that the footrest safety tray is not

dragging on the stair nosing or hitting debris on the

stairs, if necessary, reposition the stair rail mounting

brackets to correct the problem.

• Check the rail for debris that may bump safety switches

(footrest and carriage panels).

UNIT FAILS TO

OPERATE

UNIT OPERATES

SLOWLY, LACKS

POWER

CONTROLS OPER-

ATE BACKWARDS

AND UNIT GOES

“UP” SLOWLY AND

“DOWN” FASTER

TROUBLESHOOTING

UNIT OPERATES

ERRATICALLY OR

INTERMITTENTLY

WITH A RIDER

USING THE ARM-

REST MOUNTED

CONTROL SWITCH

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 55 56

Comments to this Manuals

No comments

Bruno SRE-2700 Installation Manual Page 46

Comments to this Manuals